Mit MB-01 20-Plate Brazed Plate Heat Exchanger, 3/4" – 1/2" Connection, 360 L/h

Other options

• Mit MB-01 Brazed Plate Heat Exchanger, 12 Plates, Connection 3/4"–1/2", 180 L/h – $66.31
• Mit MB-01 14-Plate Brazed Plate Heat Exchanger, 3/4"–1/2" Connection, 240 L/h (out of stock)
• Mit MB-01 16-Plate Brazed Plate Heat Exchanger, Connection 3/4–1/2, 270 L/h – $76.83
• Mit MB-01 Brazed Plate Heat Exchanger, 24 Plates, Connection 3/4"–1/2", 440 L/h (out of stock)
• Mit MB-01 Brazed Plate Heat Exchanger, 26 Plates, 3/4'' - 1/2'' Connection, 480 L/h – $66.57
• Mit MB-01-28 Brazed Plate Heat Exchanger, 3/4″–1/2″ Connection, 540 L/h Capacity – $70.35
• Mit MB-01 Brazed Plate Heat Exchanger, 30 Plates, Connection 3/4" - 1/2", 600 L/h (out of stock)
• Mit MB-05 16-Plate Brazed Plate Heat Exchanger, 1″–1″ Connection, 1,000 L/h (out of stock)
• Mit MB-05 Brazed Plate Heat Exchanger, 24 Plates, 1″ - 1″ Connection, 1,400 L/h (out of stock)
• Mit MB-05 Brazed Plate Heat Exchanger, 36 Plates, 1″ - 1″ Connection, 2,100 L/h (out of stock)

Product description

What Is the MB-01 20-Plate Heat Exchanger?

Heat exchangers are used in heating and cooling systems to transfer heat between two fluids. They are machines that allow different fluids to pass through opposite sides of the exchanger plates, transferring heat via the plates without the fluids mixing. They can be used to heat or cool water, oil, and similar liquids. To explain the basic principle for heating: water coming from a heat source such as a combi boiler enters and exits the first plate of the heat exchanger, while cold water from the system enters and exits through the second plate. As these two fluids pass through without mixing, the copper plates between them equalize their temperatures by transferring heat from one to the other. In other words, when two fluids — one hot, one cold — enter through the top connections of the heat exchanger, the temperatures of the fluids exiting through the bottom connections are nearly equal. You can see how it works in the diagram below.

Where Is the MB-01 20-Plate Heat Exchanger Used?

• Connected to heating equipment such as combi boilers, boilers, and hot water cylinders to heat system water,
• For transferring heat between different fluids without mixing them,
• Heating applications on ships,
• Heating and cooling equipment used together with accumulation tanks in HVAC applications,
• Can be used as a heat recovery device,
• Cooling hydraulic circuits in press machines and oil cooling in industrial applications,
• For utilizing the heat of fluids such as steam, superheated water, and hot water produced in power plants,
• Can be used to heat system water using the heat of geothermal water.

Features

Fouling

Particle size < 0.6 mm (spherical)

Fiber-like particles can cause a rapid pressure drop.

Temperature Range

Freezing point and boiling point must be taken into account.

Dimensions

Specifications

Similar products

• Forza Liquid Level Float Switch, 1.6 m, Rubber Cable, Electric – $9.64
• Nano Water Filter, 1 Inch – $171.69
• Element Flexible Hose with Elbow, 100 cm, 10 bar, 1″ – $16.91
• Mirox 1-6 Single-Phase No-Drain Pressure Switch, 1/4″ Connection – $17.17
• Italtecnica PM 5-3W Five-Way Pressure Switch with Pressure Gauge, 1–5 Bar, 220V – $32.22
• Pakkens Thermometer, -30+60°C, Ø63 mm, 5 cm Immersion Length, Rear Connection, G 1/2" – $7.09
• Brass Reducer, 1/2" – 3/8" – $1.47
• Caleffi 5080 Automatic Air Vent for Radiators, 1/2" – $4.36
• Welko Automatic Boiler Fill Valve, 1/2'', DN15 – $41.19
• Pakkens 100 mm Dry Pressure Gauge, Back Connection, 0-25 Bar, G 1/4" – $15.17