Forza Liquid Level Float Switch, 1.6 m, Rubber Cable, Electric
$9.64 · In stock
Brand: Forza · SKU: forzafltr · Warranty: 24 months
Other options
Product description
What Is a Liquid Level Float Switch?
Float switches are electrical control devices that monitor the rising and falling water level in tanks, wide wells, or water collections of a given volume and depth, and provide an electrical contact to control connected devices such as pumps and booster pumps. Electric float switches keep the water level within a defined range, or activate and deactivate other devices based on the water level.
Operating Principle of Liquid Level Float Switches
Because the float of the switch is lighter than water, it rises to the water surface when submerged. When the water level drops, the float descends along with the water. Meanwhile, a stainless steel ball approximately 25 mm in diameter inside the float moves approximately 2 cm forward or backward along its own channel inside the float, depending on whether the float moves up or down. A micro-switch fixed at the end of the channel through which the ball travels linearly inside the float then opens and closes as the steel ball strikes it during its back-and-forth motion. This produces an electrical switching action.
What Is the Advantage of a Rubber Cable?
The advantage of rubber-cabled float switches is that the cable does not harden over time due to changes in air and water temperature, and no cracking or breakage occurs as a result of hardening. The cable continues to operate for many years without losing its elasticity.
Liquid level float switches are used for liquid level control in stationary liquid tanks in residential and industrial facilities (tanks, artesian wells, sewage pits, and dirty water). Our liquid level switch has resistance to mineral and acidic water up to 10% concentration. The outer housing of our liquid level switches is made from anti-shock polypropylene and is resistant to high ambient temperatures.
Liquid level float switches can be used bidirectionally — they can be set to operate when in the lower position and stop in the upper position, or vice versa.
Technical Specifications
- Voltage: AC 125/250 V
- Max. Current: 16 A
- Frequency: 50–60 Hz
- Max. Liquid Temperature: 50 °C
- Protection Class: IP68
- Length: 1.6 m
Specifications
| Brand | Forza |
|---|---|
| Voltage | AC 125/250 Volt |
| Max. Current | 16 A |
| Frequency | 50-60 Hz |
| Max. Liquid Temperature | 50 °C |
| Protection Class | IP68 |
| Length | 1.6 m |
Similar products
- Nano Water Filter, 1 Inch – $171.69
- Element Flexible Hose with Elbow, 100 cm, 10 bar, 1″ – $16.91
- Mirox 1-6 Single-Phase No-Drain Pressure Switch, 1/4″ Connection – $17.17
- Italtecnica PM 5-3W Five-Way Pressure Switch with Pressure Gauge, 1–5 Bar, 220V – $32.22
- Pakkens Thermometer, -30+60°C, Ø63 mm, 5 cm Immersion Length, Rear Connection, G 1/2" – $7.09
- Brass Reducer, 1/2" – 3/8" – $1.47
- Caleffi 5080 Automatic Air Vent for Radiators, 1/2" – $4.36
- Welko Automatic Boiler Fill Valve, 1/2'', DN15 – $41.19
- Mit MB-01 Brazed Plate Heat Exchanger, 12 Plates, Connection 3/4"–1/2", 180 L/h – $66.31
- Pakkens 100 mm Dry Pressure Gauge, Back Connection, 0-25 Bar, G 1/4" – $15.17
More products in PRESSURE SWITCHES FOR BOOSTER PUMPS · All Forza products