Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 24 L Tank
$262.68 $375.26 · In stock
Brand: Winpo · SKU: WNPKH150 · Warranty: 24 months
Other options
- Winpo WNP 100 Twin-Pump Booster Set with Hydromat, 4 Floors, 4 Apartments – $241.69
- Winpo WNP 100 Domestic Booster Pump, 4 Floors, 4 Units, 24 L Tank – $224.75
- Winpo WNP 100 Domestic Booster Pump, 4 Floors, 4 Units, 24 L Horizontal Tank – $270.27
- Winpo WNP 100 Domestic Booster Pump, 4-Story / 4-Unit, 50 L Horizontal Tank – $341.58
- Winpo WNP 150 Twin-Pump Booster Set with Pressure Controller, 5-Story, 5-Apartment – $251.62
- Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 24 L Horizontal Tank – $300.62
- Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 50 L Horizontal Tank – $371.93
- Winpo WNP 200 Domestic Booster Pump, 7 Floors, 10 Apartments, 50 L Horizontal Tank – $455.38
Product description
What Are the Features of the Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 24 L Tank?
These types of twin-pump booster sets are systems used in apartment buildings, villas, schools, hospitals, factories, and housing complexes.
The booster pump automatically activates the moment water consumption begins and automatically stops when water consumption ends.
These are compact domestic booster pumps ideal for residential use. With a suction capacity of up to 8 meters, they deliver maximum suction even where water supply is intermittent. They can be used with confidence in locations where high pressure is needed at low energy consumption. Long-lasting booster pumps suitable for buildings of up to 4 stories and 6 apartments, as well as garden irrigation.
Our booster pumps are assembled from quality materials, fully tested, and shipped to the customer in perfect working order. All settings are pre-configured; only the plumbing and electrical connections need to be made. Covered by a 2-year warranty.
The pre-charge gas pressure of the expansion vessel must be checked every 6 months and any pressure loss must be topped up.
In booster sets, the advantage of the expansion vessel is that when a small amount of water is used, the booster pump does not activate — it first uses the water stored in the tank, and only when that is depleted does the pump start. This means the pump will not stop and start with every water use, resulting in a longer service life. In other words, the larger the expansion vessel on your booster set, the more water it stores, meaning the pump will work less hard and last longer.
What Are the Technical Specifications of the Winpo WNP 100 Domestic Booster Pump, 5 Floors, 5 Units, 24 L Tank?
- 100% copper-wound jet pump is used.
- Our booster pump noise level is below 84 dB.
What Are the Components of the Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 24 L Tank?
- Winpo WNP 150M Jet Pump
- 24 L Spherical Expansion Vessel
- Pressure Switch
- 5-Way
- Pressure Gauge
Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 24 L Tank – Points to Note During Use
If the booster pump will draw water from a storage tank, it is advisable to use a level float switch in case the tank runs dry. If the tank runs dry, it will stop the unit from operating and prevent motor damage. When the tank refills, the booster pump will automatically resume operation.
Click to purchase a water level float switch.
|
Technical Specifications |
||
|
Brand |
Winpo |
|
|
Type |
: |
Jet Booster Pump |
|
Model |
: |
WNP 150 – 24 L Tank |
|
Capacity |
: |
5 floors / 5 units |
|
Casing |
: |
Cast Iron |
|
Shaft |
: |
Stainless steel |
|
Motor Power |
: |
1.5 HP |
|
Power Consumption |
: |
220 V |
|
Thermal Overload Protection |
: |
Available |
|
Balancing Tank Capacity |
: |
24 L Sphere |
|
Suction / Discharge Port |
: |
1" |
|
Max. Suction Lift |
: |
8 meters |
|
Max. Fluid Temperature |
: |
40°C |
|
Max. Ambient Temperature |
: |
40°C |
Plumbing Materials
If your booster pump draws water from the same level or from above, a check valve must be used on the suction line. A check valve must also be installed on the discharge line.
Click to purchase a check valve.If your booster set draws water from below its own level (i.e., from a negative elevation), a foot valve must be used to prevent air entry.
Click to purchase a foot valve.To protect your booster pump from debris that may form in the water during suction, you can purchase a Y-strainer.
Click to purchase a Y-strainer.To ensure your booster pump stops automatically when the water in the tank or well runs out, you need to purchase a float switch. A water level float switch is used only with tank or ball-valve models; a float switch is not needed with pressure-controller-type booster pumps.
Click to purchase a water level float switch.Click here to browse other connection fittings you may need.
Specifications
| Brand | Winpo |
|---|
Similar products
- Water Sound GP2624 Automatic Booster Pump, 24V, 120W, Caravan & Boat – $224.50
- Water Sound GP2612 Automatic Booster Pump, 12V, 120W, Caravan & Boat – $224.50
- Hidrotank TD 50 Vertical Pressure Tank, 50 L, 1″ Connection – $96.15
- İKRAHİDRO-11H 1 Floor 1 Apartment Booster Pump with Pressure Switch – $106.98
- Seaflo Automatic Booster Pump, 12V, 24 L Tank, Boat, Yacht & Caravan – $302.45
- Cacheng Low-Noise Automatic Mains Pressure Booster Pump, 42 L/min, 3 Bar – $250.94
- Low-Noise Booster Pump, 24V, Boat, Yacht & Caravan, 25 L/min, 2 Bar – $126.76
- Hidrotank Globe Booster Pump Kit with Connection Set, 24 L – $106.98
- Forza TGP 130 Automatic Water Booster Pump, 3.5 Bar – $83.31
- Nano Water Filter, 1 Inch – $171.69
More products in Domestic Booster Pumps · All Winpo products