Winpo WNP 100 Domestic Booster Pump, 4 Floors, 4 Units, 24 L Tank
$224.75 $321.07 · In stock
Brand: Winpo · SKU: WNPKH100 · Warranty: 24 months
Other options
- Winpo WNP 100 Twin-Pump Booster Set with Hydromat, 4 Floors, 4 Apartments – $241.69
- Winpo WNP 100 Domestic Booster Pump, 4 Floors, 4 Units, 24 L Horizontal Tank – $270.27
- Winpo WNP 100 Domestic Booster Pump, 4-Story / 4-Unit, 50 L Horizontal Tank – $341.58
- Winpo WNP 150 Twin-Pump Booster Set with Pressure Controller, 5-Story, 5-Apartment – $251.62
- Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 24 L Tank – $262.68
- Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 24 L Horizontal Tank – $300.62
- Winpo WNP 150 Domestic Booster Pump, 5 Floors, 5 Units, 50 L Horizontal Tank – $371.93
- Winpo WNP 200 Domestic Booster Pump, 7 Floors, 10 Apartments, 50 L Horizontal Tank – $455.38
Product description
What Are the Features of the Winpo WNP 100 4-Floor 6-Unit Domestic Booster Pump with 24 L Tank?
These twin-pump booster sets are systems used in apartment buildings, villas, schools, hospitals, factories, and housing developments.
The booster pump automatically activates the moment water consumption begins and automatically stops when water consumption ends.
These are domestic booster pumps ideal for household use. With a suction lift capacity of 8 m, these booster pumps achieve maximum suction even in locations with aerated water. They can be used reliably in locations where high pressure is required at low power consumption. These are long-lasting booster pumps suitable for use in buildings up to 4 floors and 6 apartments, as well as for garden irrigation.
Our booster pumps are assembled from quality materials, fully tested, and shipped to the customer in perfect working order. All settings are pre-configured; only the plumbing and electrical connections need to be made. Covered by a 2-year warranty.
The pre-charge gas pressure of the expansion vessel must be checked every 6 months and any pressure loss must be topped up.
The advantage of the expansion vessel in a booster system is that when only a small amount of water is used, the booster pump does not activate; it first draws from the water stored in the tank, and the pump only starts when the tank is empty. The benefit is that the pump won't cycle on and off with every water use, resulting in a longer service life. In other words, the larger the expansion vessel in your booster system, the more water it stores, meaning the pump works less and lasts longer.
What Are the Technical Specifications of the Winpo WNP 100 4-Floor 6-Unit Domestic Booster Pump with 24 L Tank?
- 100% copper-wound jet pump is used.
- The noise level of our booster pumps is below 84 dB.
What Are the Components of the Winpo WNP 100 4-Floor 6-Unit Domestic Booster Pump with 24 L Tank?
- Winpo WNP 100M Jet Pump
- 24 L Spherical Expansion Vessel
- Pressure Switch
- 5-Way
- Pressure Gauge
Important Notes When Using the Winpo WNP 100 4-Floor 6-Unit Domestic Booster Pump with 24 L Tank
If the booster pump draws water from a storage tank, it is advisable to use a float switch in case the tank runs dry. When the tank runs dry, it stops the unit from operating and prevents motor failure. When the tank refills, the booster pump automatically restarts.
Click to purchase a water level float switch.
|
Technical Specifications |
||
|
Brand |
Winpo |
|
|
Type |
: |
Jet Booster Pump |
|
Model |
: |
WNP 100 – 24 L Tank |
|
Capacity |
: |
4 floors / 6 apartments |
|
Casing |
: |
Cast Iron |
|
Shaft |
: |
Stainless steel |
|
Motor Power |
: |
1 HP |
|
Power Consumption |
: |
220 V |
|
Thermal Overload Protection |
: |
Available |
|
Balancing Tank Capacity |
: |
24 L Sphere |
|
Suction / Discharge Port |
: |
1" |
|
Max. Suction Lift |
: |
8 meters |
|
Max. Fluid Temperature |
: |
40°C |
|
Max. Ambient Temperature |
: |
40°C |
Plumbing Materials
If your booster pump draws water from the same level or from a higher elevation, a check valve must be used on the suction line. A check valve must also always be used on the discharge line.
Click to purchase a check valve.If your booster pump draws water from below its own level — i.e., from a negative elevation — a foot valve must be used to prevent air locks.
Click to purchase a foot valve.To protect your booster pump from debris that may form in the water during suction, you can purchase a Y-strainer.
Click to purchase a Y-strainer.To ensure your booster pump stops automatically when the water in the tank or well runs out, you need to purchase a float switch. A water level float switch is used only with tank or ball-valve models; a float switch is not needed with pressure-controller-type booster pumps.
Click to purchase a water level float switch.Click to browse other connection fittings you may need.
Specifications
| Brand | Winpo |
|---|
Similar products
- Water Sound GP2624 Automatic Booster Pump, 24V, 120W, Caravan & Boat – $224.50
- Water Sound GP2612 Automatic Booster Pump, 12V, 120W, Caravan & Boat – $224.50
- Hidrotank TD 50 Vertical Pressure Tank, 50 L, 1″ Connection – $96.15
- İKRAHİDRO-11H 1 Floor 1 Apartment Booster Pump with Pressure Switch – $106.98
- Seaflo Automatic Booster Pump, 12V, 24 L Tank, Boat, Yacht & Caravan – $302.45
- Cacheng Low-Noise Automatic Mains Pressure Booster Pump, 42 L/min, 3 Bar – $250.94
- Low-Noise Booster Pump, 24V, Boat, Yacht & Caravan, 25 L/min, 2 Bar – $126.76
- Hidrotank Globe Booster Pump Kit with Connection Set, 24 L – $106.98
- Forza TGP 130 Automatic Water Booster Pump, 3.5 Bar – $83.31
- Nano Water Filter, 1 Inch – $171.69
More products in Domestic Booster Pumps · All Winpo products