Supomp – Water Pumps, Submersible Pumps and Booster Pumps Türkçe

Sumak SMJ 150 Booster Pump with Pressure Controller, 5 Floors, 10 Apartments, 220V, 1.5 Hp

$322.26 · In stock

Brand: Sumak · SKU: SMJh 150 · Warranty: 24 months

Sumak SMJ 150 Booster Pump with Pressure Controller, 5 Floors, 10 Apartments, 220V, 1.5 Hp

Other options

Product description

What Are the Specifications of the Sumak SMJ 150 Booster Pump with WNP-10H Pressure Controller, 5 Floors, 10 Apartments?

These types of twin-pump booster sets are systems used in apartment buildings, villas, schools, hospitals, factories, and housing complexes.

The booster pump automatically activates the moment water consumption begins and automatically stops when water consumption ends.

These are domestic small-scale booster pumps ideal for residential use. With a suction lift capacity of up to 9 m, these booster pumps achieve maximum suction even in locations where the water is aerated. They can be used reliably in locations requiring high pressure with low power consumption. These are long-lasting booster pumps suitable for use in buildings up to 5 floors and 10 apartments, as well as for garden irrigation.

Our booster pumps are assembled from quality materials, fully tested, and shipped to the customer in perfect working order. All settings are pre-configured; only the plumbing and electrical connections need to be made. Covered by a 2-year warranty.

The pre-charge gas pressure of the expansion vessel must be checked every 6 months and any pressure loss must be topped up.

The advantage of the expansion vessel in a booster system is that when only a small amount of water is used, the booster pump does not activate; it first draws from the water stored in the tank, and the pump only starts when the tank is empty. The benefit is that the pump won't cycle on and off with every water use, resulting in a longer service life. In other words, the larger the expansion vessel in your booster system, the more water it stores, meaning the pump works less and lasts longer.

Sumak SMJ 150 Booster Pump, 5 Floors, 10 Apartments, WNP-10H Pressure Controller — Technical Specifications

  • 100% Domestically Manufactured
  • Our booster pump noise level is below 84 dB.

Sumak SMJ 150 Booster Pump, 5 Floors, 10 Apartments, WNP-10H Pressure Controller — Components

  • 5-Way
  • Pressure Switch
  • Pressure Gauge
  • Flex hose used
  • Sumak SMJ 150 and WNP-10H Pressure Controller

Sumak SMJ 150 Booster Pump, 5 Floors, 10 Apartments, WNP-10H Pressure Controller — Points to Note During Use

If the booster pump will draw water from a storage tank, it is advisable to use a level float switch in case the tank runs dry. If the tank runs dry, it will stop the unit from operating and prevent motor damage. When the tank refills, the booster pump will automatically resume operation.

Pressure Controller Specifications

The automatic pressure controller automatically stops the pump if the water supply from the suction side runs out, preventing the pump from running dry. It automatically starts the pump when water use begins and stops it when water use ends. For use with pumps providing a minimum of 2.7 bar pressure and a maximum of 1.5 Hp single-phase.

HARDWARE

For easy and safe electrical installation, the unit is equipped with a socket and a 150 cm cable with plug.

A check valve is integrated into the unit. No additional check valve is required.

The pressure controller unit is equipped with a pressure gauge to allow the system pressure to be read and the pump operating settings to be adjusted.

Technical Information (Made in Turkey)

Brand

Sumak

Type

:

Jet Booster Pump

Model

:

SMJ 150 – With Pressure Controller

Capacity

:

5 floors / 10 apartments

Casing

:

Cast Iron

Shaft

:

Stainless steel

Motor Power

:

1.5 HP

Power Consumption

:

220 V

Thermal Overload Protection

:

Available

Balancing Tank Capacity

:

Fully automatic with pressure controller

Suction / Discharge Port

:

1"

Max. Suction Lift

:

9 meters

Max. Fluid Temperature

:

45°C

Max. Ambient Temperature

:

40°C

Voltage

Single-Phase (220 V)

Power kW

1.1 kW

Power Hp

1.5 Hp

Max. Flow Rate m³/h

3-5 m3/h

Max. Pressure m (head)

51-75 m

Connection Type

Threaded

Inlet Connection Diameter

1"

Outlet Connection Diameter

1"

Suction Lift

9 Meters

Speed rpm

2900 rpm

Number of Floors

5 Floors

Number of Apartments

10 Apartments

Tank Volume

With Hydromat

Specifications

BrandSumak

Similar products

More products in Expansion Vessel · All Sumak products