Sumak SM5 Small Domestic Booster Pump, 2 Floors, 2 Units, with Pressure Controller

Name: Sumak SM5 Small Domestic Booster Pump, 2 Floors, 2 Units, with Pressure Controller
Brand: Sumak
SKU: SMH5
Price: 187.17 USD
Availability: InStock

$187.17 ~~$249.56~~ · In stock

Brand: Sumak · SKU: SMH5 · Warranty: 24 months

Sumak SM5 Small Domestic Booster Pump, 2 Floors, 2 Units, with Pressure Controller

Other options

Sumak SM5 Twin-Pump Booster Set, 2 Floors, 2 Units, 24 L Tank – $239.07
Sumak SM 10 Booster Pump, 4 Floors, 4 Units, with Hydromat – $289.20
Sumak SM 10 Home and Garden Booster Pump, 4 Floors, 4 Units, 24 L Tank – $339.83
Sumak SM 15 Booster Pump, 4-Story, 6-Apartment, with Hydromat – $379.11

Product description

Sumak SM5 2-Floor 2-Unit Small Domestic Booster Pump – Specifications

Booster pumps with pressure controller are suitable for direct connection to the mains; they can also draw water from a tank or a well.

A check valve is built in; no additional check valve is required.

Protected against dry running — the pump shuts itself down when no water is supplied, so no float switch is needed.

Contains no tank, so no maintenance is required.

Sumak SM5 Booster Pump – Technical Specifications

100% Domestically Manufactured
Noise level is below 84 dB.

What Are the Components of the Sumak SM5 2-Floor Small Domestic Booster Pump with Pressure Controller?

Sumak SM5 Peripheral Pump
EPC LS-4 Hydromat

Technical Information (Made in Turkey)
Brand	:	Sumak
Type	:	Peripheral
Model	:	SM 5 – With Pressure Controller
Capacity	:	2 floors / 2 apartments
Casing	:	Cast Iron
Shaft	:	Stainless steel
Motor Power	:	0.5 HP
Power Consumption	:	220 V
Thermal Overload Protection	:	Available
Balancing Tank Capacity	:	Fully automatic with pressure controller
Suction / Discharge Port	:	1"
Max. Suction Lift	:	6 m
Max. Fluid Temperature	:	45°C
Max. Ambient Temperature	:	40°C

Pressure Controller Specifications

This automatic device stops the pump when the water supply on the suction side runs out, preventing dry running. It starts the pump automatically when water consumption begins and stops it when water consumption ends. Suitable for single-phase pumps with a minimum of 2.7 bar pressure and a maximum of 1.5 HP.

HARDWARE

For easy and safe electrical installation, the device is equipped with a socket outlet and a 100 cm cable with plug.

A check valve is integrated into the unit. No additional check valve is required.

The hydromat unit includes a pressure gauge to allow monitoring of the system pressure and adjustment of the pump operating settings.

Plumbing Materials

If the unit draws water from the same level or from a higher elevation, a check valve must be used on the suction line. A check valve must also be used on the discharge line.

Click to purchase a check valve.

If the booster pump draws water from below its own level (negative elevation), a foot valve must be used to prevent air locks.

Click to purchase a foot valve.

To protect against debris in the water during suction, you can purchase a Y-strainer.

Click to purchase a Y-strainer.

To ensure the pump stops automatically when the water in the tank or well runs out, you need to purchase a liquid level float switch. A float switch is used only with tank or ball-valve models; it is not needed with pressure-controller models.

Click to purchase a water level float switch.

Click here to browse other fittings and accessories you will need.

To see different models with similar specifications, you can browse all our booster pump models on the category page.

Specifications

Brand	Sumak