Water Level Switch – Cord Float Switch, Electric Float
$18.97 · In stock
SKU: KDS-15W · Warranty: 24 months
Product description
The float switch level controller must be mounted vertically. The device has two floats, which it uses to monitor the water level. It automatically controls the connected system, saving time and labor, while also protecting the system against faults by preventing the risk of running dry.It can be used safely in confined spaces where standard float switches cannot operate. Since the contact section remains outside the liquid, there is no risk of electric shock, electrifying the water, or short circuits.
Using the two water containers included, you can precisely set the upper and lower water levels in the tank.
The device has dual contacts and can be used in two different ways:
- It stops the pump when there is water in the tank, so you do not need to manually control the pump when the water level drops; the pump stops automatically once the water in the tank reaches the sufficient level, preventing the system from running dry.
- When liquid fills the tank, the motor starts running, thereby draining the full tank; alternatively, it prevents the pump from running while the tank is empty, protecting the motor or system against dry running.
Benefits
- Using this system, you can prevent overflow from a tank, pool, or your system, saving water and energy while protecting the water pump against overworking and dry running.
- Its automatic control saves time and effort, eliminating the need for a dedicated operator to manage the system.
- They also operate very reliably in high-temperature and hot water systems.
- Can be used in confined spaces where electric float switches cannot be used.
- You will not encounter problems such as jamming or failure to function inside a well or tank.
Installation
Thanks to its 8 mounting holes, it can be mounted on a flat surface as well as on a wall or vertical surface.
It can also be connected to a 3/4" or 1" (inch) tank outlet or coupling via its threaded connection parts.
The two water containers supplied with the product are filled with water and tied using the rope provided — one container is set at the upper water level of the tank and the second at the lower water level.
Features
- Voltage: 220 V / 7.5 A
- Voltage: 110 V / 15 A
- Rated Frequency: 50 Hz
- Mechanical Life: 1,000,000 Operations
- Tank Pressure: 1 bar
Similar products
- Forza Liquid Level Float Switch, 1.6 m, Rubber Cable, Electric – $9.64
- Nano Water Filter, 1 Inch – $171.69
- Element Flexible Hose with Elbow, 100 cm, 10 bar, 1″ – $16.91
- Mirox 1-6 Single-Phase No-Drain Pressure Switch, 1/4″ Connection – $17.17
- Italtecnica PM 5-3W Five-Way Pressure Switch with Pressure Gauge, 1–5 Bar, 220V – $32.22
- Pakkens Thermometer, -30+60°C, Ø63 mm, 5 cm Immersion Length, Rear Connection, G 1/2" – $7.09
- Brass Reducer, 1/2" – 3/8" – $1.47
- Caleffi 5080 Automatic Air Vent for Radiators, 1/2" – $4.36
- Welko Automatic Boiler Fill Valve, 1/2'', DN15 – $41.19
- Mit MB-01 Brazed Plate Heat Exchanger, 12 Plates, Connection 3/4"–1/2", 180 L/h – $66.31