Ulusu JSPM600-H Jet Small Booster Pump, 3 Floors, 3 Units, 24 L Tank

Other options

• Ulusu JSPM600-H Jet Booster Pump with Pressure Controller, 3 Floors, 3 Apartments, Wnp-10H (out of stock)
• Ulusu JSPM600-H Jet Booster Pump, 3 Floors, 3 Apartments, 24 L Spherical Tank (out of stock)
• Ulusu JSPM600-H Jet Booster Set, 3 Floors, 3 Apartments, 50 L Tank (out of stock)

Product description

What Is a Booster Pump?

Booster pumps are automatic pumps used to pressurize water where mains pressure is insufficient. They can be used on their own or, in some plumbing systems, together with a water storage tank.

They pressurize mains water in homes, apartments, buildings, villas, and residential complexes, or deliver water from a storage tank to the plumbing system under pressure.

What Are the Applications of Booster Pumps?

• Booster pump systems are used in homes and gardens, detached houses, and villas, as well as in low- and multi-story buildings, apartment complexes, and large structures such as schools, hospitals, office centers, and shopping malls.
• They are used to maintain the desired pressure and flow rate at a constant level for comfortable water use. To ensure a long service life and reliable water supply, pressure and flow rate calculations must be carried out carefully based on the installation site.

Depending on intended use;

• Domestic water supply,
• Fire-fighting water supply,
• Irrigation water supply,
• Process water supply.

What Are the Specifications of the Ulusu JSPM600-H Jet Booster Pump, 3 Floors, 3 Units, 24 L Tank?

Twin-pump booster sets of this type are used in apartment buildings, villas, schools, hospitals, factories, and housing complexes. The booster pump starts automatically as soon as water consumption begins and stops automatically when consumption ends. These are domestic booster pumps ideal for residential use. With a suction lift capacity of 9 meters, these booster pumps deliver maximum suction even in locations where the water contains air bubbles.

It can be used reliably in locations where high pressure is required with low power consumption. These long-lasting booster pumps can be used in buildings of up to 3 floors and 3 units and for garden irrigation. All settings come pre-configured; only plumbing and electrical connections need to be made. 2-year warranty.

What Are the Technical Specifications of the JSPM600-H Jet Twin-Pump Booster Set, 3 Floors, 3 Units, 24 L Tank?

• The pre-charge gas pressure of the expansion vessel must be checked every 6 months and any pressure loss must be topped up.
• Because the product casing is made of plastic, it does not corrode or rust and can be safely used in drinking water installations.
• The booster pump comes with a 1.5 m power cable.
• Products are shipped with the tank pre-charge pressure, pressure switch settings, and tests already completed.
• Our booster pump noise level is below 84 dB.

What Is Included with the JSPM600-H Jet Twin-Pump Booster Set, 3 Floors, 3 Units, 24 L Tank?

• Ulusu Jspm-600 Jet Pump
• 24-Liter Horizontal Expansion Vessel
• 70 cm Elbow Flex Hose
• 1–6 Bar Pressure Switch
• 5-Way Tee
• 0–6 Bar Pressure Gauge

Important Notes for Using the JSPM600-H Jet Twin-Pump Booster Set, 3 Floors, 3 Units, 24 L Tank

If the booster pump will draw water from a storage tank, it is advisable to use a level float switch in case the tank runs dry. If the tank runs dry, it will stop the unit from operating and prevent motor damage. When the tank refills, the booster pump will automatically resume operation.

Plumbing Materials

If your booster pump draws water from the same level or from above, a check valve must be used on the suction line. In addition, a check valve must always be used on the discharge line as well.

If your booster set draws water from below its own level (i.e., from a negative elevation), a foot valve must be used to prevent air entry.

To protect your booster pump from debris that may form in the water during suction, you can purchase a Y-strainer.

To ensure your booster pump stops automatically when the water in the tank or well runs out, you need to purchase a float switch. A water level float switch is used only with tank or ball-valve models; a float switch is not needed with pressure-controller-type booster pumps.

Specifications

Similar products

• Water Sound GP2624 Automatic Booster Pump, 24V, 120W, Caravan & Boat – $224.50
• Water Sound GP2612 Automatic Booster Pump, 12V, 120W, Caravan & Boat – $224.50
• Hidrotank TD 50 Vertical Pressure Tank, 50 L, 1″ Connection – $96.15
• İKRAHİDRO-11H 1 Floor 1 Apartment Booster Pump with Pressure Switch – $106.98
• Seaflo Automatic Booster Pump, 12V, 24 L Tank, Boat, Yacht & Caravan – $302.45
• Cacheng Low-Noise Automatic Mains Pressure Booster Pump, 42 L/min, 3 Bar – $250.94
• Low-Noise Booster Pump, 24V, Boat, Yacht & Caravan, 25 L/min, 2 Bar – $126.76
• Hidrotank Globe Booster Pump Kit with Connection Set, 24 L – $106.98
• Forza TGP 130 Automatic Water Booster Pump, 3.5 Bar – $83.31
• Nano Water Filter, 1 Inch – $171.69