Supomp – Water Pumps, Submersible Pumps and Booster Pumps Türkçe

Ulusu JSPM600-H Jet Booster Pump with Pressure Controller, 3 Floors, 3 Apartments, Wnp-10H

Request a quote: 0531 565 11 25. · Out of stock

Brand: Ulusu · SKU: Ulusu-JSPM-600-HH · Warranty: 24 months

Ulusu JSPM600-H Jet Booster Pump with Pressure Controller, 3 Floors, 3 Apartments, Wnp-10HUlusu JSPM600-H Jet Booster Pump with Pressure Controller, 3 Floors, 3 Apartments, Wnp-10H

Other options

Product description

What Is a Booster Pump?

Booster pumps are automatic pumps used to pressurize water where mains pressure is insufficient. They can be used on their own or, in some plumbing systems, together with a water storage tank.

They pressurize mains water in homes, apartments, buildings, villas, and residential complexes, or deliver water from a storage tank to the plumbing system under pressure.

What Are the Specifications of the JSPM600-H Jet Domestic Booster Pump, 3 Floors, 3 Apartments, with Wnp-10H Pressure Controller?

These are domestic booster pumps ideal for household use. They can be used safely in locations where high pressure is needed with low power consumption. These booster pumps are used for up to 3 floors and 3 apartments, and are also used for water transfer and garden irrigation systems.

Thanks to the pressure controller on board, it protects itself against dry running by automatically stopping the pump when water runs out, and automatically restarts the pump when water returns. Since the pressure controller has its own built-in check valve, a separate check valve is not needed.

A pressure gauge is included on the pressure controller to allow the pressure in the system to be read and the pump operating settings to be adjusted. An extremely practical and high-quality product that can be used wherever needed.

What Are the Specifications of the Wnp-10H Pressure Controller?

  • The automatic pressure controller device automatically stops the pump if the water supply from the suction side runs out.
  • Prevents the pump from running dry.
  • Automatically starts the pump when water use begins.
  • Stops the pump when water use ends.
  • For use with single-phase pumps at a minimum of 2.7 bar and a maximum of 1.5 HP.

What Are the Technical Specifications of the JSPM600-H Jet Domestic Booster Pump, 3 Floors, 3 Apartments, with Wnp-10H Pressure Controller?

  • For easy and safe electrical installation, the unit is equipped with a socket and a 150 cm cable with plug.
  • A check valve is integrated into the unit. No additional check valve is required.
  • A pressure gauge is included on the pressure controller to allow the pressure in the system to be read and the pump operating settings to be adjusted.
  • Because the product casing is made of plastic, it does not corrode or rust and can be safely used in drinking water installations.
  • The booster pump comes with a 1.5 m power cable.
  • Our booster pump noise level is below 84 dB.

What Is Included with the JSPM600-H Jet Domestic Booster Pump, 3 Floors, 3 Apartments, with Wnp-10H Pressure Controller?

  • Ulusu Jspm-600 Jet Pump
  • Winpo Wnp-10H Pressure Controller

Technical Specifications

Brand

:

Ulusu

Type

:

Jet Booster Set

Model

:

Jspm600 – with Pressure Controller

Capacity

:

3 Floors / 3 Apartments

Casing

:

Plastic

Shaft

:

Stainless steel

Motor Power

:

0.80 HP

Power Consumption

:

220 V

Pressure : 4 Bar
Flow Rate : 47 L/min

Thermal Overload Protection

:

Available

Suction / Discharge Port

:

1"

Max. Suction Lift

:

9 meters

Power Cable : 1.5 m

Max. Fluid Temperature

:

45°C

Max. Ambient Temperature

:

40°C

Type kW Hp Voltage Operating Pressure Flow Rate Width Length Height Number of Apartments Number of Floors
JSPM600 0.60 0.80 220 Volt 2-4 Bar 2.8 m³/h 160 mm 360 mm 390 mm 3 3

Width (W): 160 mm

Length (L): 360 mm

Height (H): 390 mm

Plumbing Materials

If your booster pump draws suction from the same level or above, a check valve must be used on the suction line. A check valve must also be installed on the discharge line.

If your booster set draws water from below its own level (i.e., from a negative elevation), a foot valve must be used to prevent air entry.

To protect your booster pump from debris that may form in the water during suction, you can purchase a Y-strainer.

To ensure your booster pump stops automatically when the water in the tank or well runs out, you need to purchase a float switch. A water level float switch is used only with tank or ball-valve models; a float switch is not needed with pressure-controller-type booster pumps.

What Are the Applications of Booster Pumps?

    • Booster pump systems are used in homes and gardens, detached houses, and villas, as well as in low- and multi-story buildings, apartment complexes, and large structures such as schools, hospitals, office centers, and shopping malls.
    • They are used to maintain the desired pressure and flow rate at a constant level for comfortable water use. To ensure a long service life and reliable water supply, pressure and flow rate calculations must be carried out carefully based on the installation site.

Depending on intended use;

  • Domestic water supply,
  • Fire-fighting water supply,
  • Irrigation water supply,
  • Process water supply.

Specifications

BrandUlusu
Motor Power0.85 HP (0.65 kW)
Voltage220 V (Single-Phase)
Flow Rate Range0-5 m³/h
Head Range31-40 m
Number of Floors3 Floors
Floor/Apartment Capacity2 Floors / 4 Apartments, 3 Floors / 3 Apartments
Number of Apartments3 Apartments
Inlet1" - 25 mm
Outlet Diameter1" - 25 mm
Suction Lift9 m

Similar products

More products in Domestic Booster Pumps · All Ulusu products