Solar Submersible Pump, 24 V DC, 250 W, 15 m Cable, 50 m Head, 1.5 m³/h

Important Points When Purchasing This Product

• The amperage required by the product varies according to the head.
  It can operate up to a 20 m head with a 250 W, 9 A panel; if a 30 m head is required, a minimum of 10 A is needed, meaning two 250 W, 9 A panels must be used and connected in parallel.
  This keeps the voltage at a constant 24 V, but since the panels are connected in parallel, the current will be 18 A, which is sufficient for this pump.
• For this product, the hourly flow rate and required amperage at each head value are listed below; please take this data into account when placing your order.
• The maximum submersion depth of the product is 15 m. It must not be submerged deeper than 15 m.

What Is It?

• It has a 250 W motor and can easily operate on solar energy.
• With its 3" (8 cm) outer diameter, it works perfectly even in narrow wells.
• Can be powered by a minimum of one 250 W solar panel.
• The number of panels can be increased to achieve longer operating times.
• The product can also be operated with a battery.
• If a charge controller and battery are added to the solar energy system, the pump can operate more safely and can be powered from the battery during periods of no or low sunlight.

• Voltage: 24V
• Current: 11 A
• 250 W
• Maximum Head: 50 m
• Maximum output of 1.5 m³/h.
• Outlet: 1"
• 15 m cable length
• Supplied with a 1″ hose fitting.

Prices

Applications

Drinking Water
Locations without electricity
Water supply for livestock
Playgrounds