Pedrollo PQm 60-BS Peripheral Pump, Bronze Casing
$355.90 $547.54 · In stock
Brand: Pedrollo · SKU: PQM60BS · Warranty: 24 months
Other options
- Pedrollo PQm 60 Peripheral Cast Iron Pump, 40 m, 2.4 m³/h – $175.33
- Pedrollo PQm 65 Peripheral Pump, Cast Iron Body, 55 m, 3.0 m³/h – $231.56
- Pedrollo PQm 65-BS Peripheral Pump, Bronze Casing – $477.01
- Pedrollo PQm 81 Cast Iron Peripheral Pump, 90 m, 1.08 m³/h (out of stock)
- Pedrollo PQm 81-BS Peripheral Pump, Bronze Casing – $521.13
- Pedrollo PQ 81 Peripheral Pump, Cast Iron Casing (out of stock)
- Pedrollo PQ81-BS Peripheral Pump, Bronze Casing, Three-Phase, 380 V – $539.30
Product description
Pedrollo PQm 60-BS Peripheral Pump Specifications
- Marine and boating industry,
- Heating and cooling systems,
- Used in hot water cylinders and chillers.
- Suction lift 8 m,
- Maximum pressure: 9 bar,
- Motor power: 0.5 HP,
- Operates on 220 V (domestic power).
- Inlet/Outlet: 1" (25 mm),
- Maximum vertical head is 40 m. Maximum horizontal distance is 400 m.
| Flow Rate (m³/h) | Vertical Discharge Distance | Horizontal Discharge Distance |
| 0 | 40 m | 400 m |
| 0.3 | 38 m | 380 m |
| 0.6 | 33 m | 330 m |
| 0.9 | 29 m | 290 m |
| 1.2 | 24 m | 240 m |
| 1.5 | 19 m | 190 m |
| 1.8 | 15 m | 150 m |
| 2.1 | 10 m | 100 m |
| 2.4 | 5 m | 50 m |
| Pump Type | Power (HP) | Inlet | Outlet | m³/h | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 |
| PQm 60-BS | 0.5 | 1" | 1" | H (meters) |
40 | 38 | 33 | 29 | 24 | 19 | 15 | 10 | 5 |
| Pump Type | Connection | Size mm |
||||||||||||
| PQm 60-BS | DN1 | DN2 | a | f | h | h1 | h2 | h3 | i | m | n | n1 | w | s |
| 1" | 1" | 22 | 190 | 145 | 101 | 30 | 131 | 76 | 55 | 118 | 96 | 53 | 7 |
1- Pump Casing: Cast Iron
2- Motor Cover: Aluminum and Bronze
3- Fan: Bronze
4- Motor shaft: Stainless Steel
5- Mechanical Seal
6- Bearing
7- Capacitor
8- Motor
Plumbing Materials
If your pump draws suction from the same level or from a higher elevation, a check valve must be used on the suction line. A check valve must also be used on the pump's discharge line. Click to purchase a check valve.
If your pump draws suction from below its own level (negative elevation), a foot valve must be used to prevent air entrainment. Click to purchase a foot valve.
To protect your pump from debris that may form in the water during suction, you can purchase a Y-strainer. Click to purchase a Y-strainer.
Click here to browse other fittings and accessories you will need.
Specifications
| Brand | Pedrollo |
|---|
Similar products
- Water Sound CPM-200 Centrifugal Water Pump, 220V, 42 m, 6 m³/h – $244.34
- jet100 – $176.95
- Water Sound CM20 Open Impeller Centrifugal Pump, 220V, 1 Hp – $147.92
- Water Sound SP1500 Centrifugal Water Pump, 220V, 32 m, 24 m³/h – $417.35
- Taifu GP750 Dirty Water Drainage Submersible Pump, 12 m³/h, 8 m – $84.53
- Winpo WNP 158 Single-Impeller Centrifugal Pump, 37 m, 220V, 6.6 m³/h – $192.83
- Varan 2HCP-160B Two-Stage Monobloc Pump, 380V, 2 Hp – $338.11
- Water Sound CM-70 Centrifugal Water Pump, 28 m, 220V, 20 m³/h – $245.66
- Water Sound SCM2-52 Two-Stage Centrifugal Pump, 45 m, 220V, 7.2 m³/h – $263.88
- Varan 2HCP-200 Two-Stage Monobloc Pump, 380V, 4 Hp – $475.59
More products in Peripheral Pumps (Friction Impeller) · All Pedrollo products