Pedrollo CPm 180-ST4 Fully Stainless Steel Pump, 32 m, 13.8 m³/h

Other options

• Pedrollo CPm 158-ST4 Full Stainless Steel Pump, 37 m, 7.2 m³/h – $472.71
• Pedrollo CPm 158-ST6 Full Stainless Steel Pump, 37 m, 7.2 m³/h – $599.87
• Pedrollo CP 158-ST4 Full Stainless Steel Pump, 37 m, 7.2 m³/h – $501.25
• Pedrollo CP 158-ST6 All-Stainless Steel Pump, 37 m, 7.2 m³/h – $631.88
• Pedrollo CPm 170-ST4 Full Stainless Steel Pump, 41 m, 8.4 m³/h – $640.44
• Pedrollo CPm 170-ST6 Full Stainless Steel Pump, 41 m, 8.4 m³/h – $782.32
• Pedrollo CP 170-ST4 Full Stainless Steel Pump, 41 m, 8.4 m³/h – $662.07
• Pedrollo CP 170-ST6 Full Stainless Steel Pump, 41 m, 8.4 m³/h – $809.14
• Pedrollo CPm 180-ST6 Full Stainless Steel Pump, 32 m, 13.8 m³/h – $809.14
• Pedrollo CP 180-ST4 Full Stainless Steel Pump, 32 m, 13.8 m³/h – $688.89
• Pedrollo CP 180-ST6 All Stainless Steel Pump, 32 m, 13.8 m³/h – $829.90
• Pedrollo CPm 190-ST4 Full Stainless Steel Pump, 37 m, 13.8 m³/h – $704.46
• Pedrollo CPm 190-ST6 Full Stainless Steel Pump, 37 m, 13.8 m³/h – $835.96
• Pedrollo CP 190-ST4 Full Stainless Steel Pump, 37 m, 13.8 m³/h – $704.46
• Pedrollo CP 190-ST6 All-Stainless Steel Pump, 37 m, 13.8 m³/h – $835.96
• Pedrollo CP 200-ST4 Full Stainless Steel Pump, 45 m, 16.2 m³/h – $752.08
• Pedrollo CP 200-ST6 Full Stainless Steel Pump, 45 m, 18 m³/h – $912.99

Product description

Pedrollo CPm 180-ST4 Fully Stainless Steel Pump Specifications

• In booster pump systems,
• In garden irrigation,
• In field irrigation,
• Thanks to its stainless steel casing, it is generally used for clean water supply in buildings.
• Suction lift: 7 m
• Maximum pressure: 8 bar
• Pump motor power: 1.5 HP
• Operates on 220 V (domestic power).
• Inlet/Outlet: 1 1/4" (32 mm) / 1" (25 mm)
• Maximum head: 32 m vertical, 320 m horizontal

1- Pump casing: AISI 304 stainless steel

2- Back plate: AISI 304 stainless steel

3- Impeller: AISI 304 stainless steel

4- Motor shaft: AISI 304 stainless steel

5- Mechanical seal: carbon/ceramic

6- Bearing

7- Capacitor

8- Motor

Plumbing Materials

If your pump draws water from the same level or from a higher elevation, a check valve must be used on the suction line. A check valve must also always be used on the discharge line. Click to purchase a check valve.

If your pump draws water from below its own level — i.e., from a negative elevation — a foot valve must be used to prevent air locks. Click to purchase a foot valve.

To protect your pump from debris that may form in the water during suction, you can purchase a Y-strainer. Click to purchase a Y-strainer.

Click here to browse other fittings and accessories you will need.

Specifications

Similar products

• Water Sound CPM-200 Centrifugal Water Pump, 220V, 42 m, 6 m³/h – $244.34
• jet100 – $176.95
• Water Sound CM20 Open Impeller Centrifugal Pump, 220V, 1 Hp – $147.92
• Water Sound SP1500 Centrifugal Water Pump, 220V, 32 m, 24 m³/h – $417.35
• Taifu GP750 Dirty Water Drainage Submersible Pump, 12 m³/h, 8 m – $84.53
• Winpo WNP 158 Single-Impeller Centrifugal Pump, 37 m, 220V, 6.6 m³/h – $192.83
• Varan 2HCP-160B Two-Stage Monobloc Pump, 380V, 2 Hp – $338.11
• Water Sound CM-70 Centrifugal Water Pump, 28 m, 220V, 20 m³/h – $245.66
• Water Sound SCM2-52 Two-Stage Centrifugal Pump, 45 m, 220V, 7.2 m³/h – $263.88
• Varan 2HCP-200 Two-Stage Monobloc Pump, 380V, 4 Hp – $475.59