Welko LPS 15-8.5Z/160 Solar Pressure Booster Pump

It operates reliably even in the hottest regions of Türkiye.

Brings your hot water to the same pressure as your cold mains water. Provides comfortable use.

You receive your hot water at a consistently steady pressure, without interrupted flow or noticeable pump cycling.

Simply connect it to the hot water line and plug it in — no adjustment or maintenance required.

This booster set has two operating modes — manual and automatic. In manual mode it runs as long as the power plug is connected; in automatic mode it starts when you open a tap and stops when you close it. It is ideal for single apartments and detached houses; in homes where it is installed, you will have no pressure problems with hot water or difficulty mixing and tempering water. These products are resistant to hot water and operate without issues in all solar energy systems.

When operating in automatic mode, if water stops flowing or is cut off, the pump will protect itself, so there are no fault issues — it is protected against dry running.

Pump controllers are used not only for hot water but also in locations where water arrives without sufficient pressure, to pressurize the supply.

The pump and motor are sealless; two gaskets form a single integrated unit to ensure leak-tightness. The bearings are lubricated by the pumped liquid.

Pressure controllers are used not only for hot water but also for pressurizing water supply where the flow arrives without pressure.