Ulusu JSPM600 Plastic Casing Jet Pump, 0.80 HP, 40 m, 2.8 m³/h
Request a quote: 0531 565 11 25. · Out of stock
Brand: Ulusu · SKU: Ulusu-JSPM-600 · Warranty: 24 months


Product description
They are self-priming, low-noise jet pumps.
These pumps draw from a depth of 9 m and deliver water up to a maximum height of 40 m. They are ideal pumps that can be used for irrigation in small gardens, and — thanks to their advanced design, quiet operation, and maintenance-free nature — for clean water supply as a booster pump in buildings of up to 3 floors, villas, and vacation homes.
|
Technical Specifications |
||
|
Brand |
: |
Ulusu |
|
Type |
: |
Plastic Jet Pump |
|
Model |
: |
Jspm600 |
|
Casing |
: |
Plastic |
|
Shaft |
: |
Stainless steel |
|
Motor Power |
: |
0.80 HP |
|
Power Consumption |
: |
220 V |
| Pressure | : | 4 Bar |
| Flow Rate | : | 47 L/min |
|
Thermal Overload Protection |
: |
Available |
|
Suction / Discharge Port |
: |
1" |
|
Max. Suction Lift |
: |
9 meters |
| Power Cable | : | 1.5 m |
|
Max. Fluid Temperature |
: |
45°C |
|
Max. Ambient Temperature |
: |
40°C |
| Type | kW | Hp | Voltage | Operating Pressure | Flow Rate | Width | Length | Height |
| JSPM600 | 0.60 | 0.80 | 220 Volt | 2-4 Bar | 2.8 m³/h | 160 mm | 360 mm | 190 mm |
|
Width (W): 160 mm Length (L): 360 mm Height (H): 190 mm |
Plumbing Materials
If your booster pump draws suction from the same level or above, a check valve must be used on the suction line. A check valve must also be installed on the discharge line.
If your booster set draws water from below its own level (i.e., from a negative elevation), a foot valve must be used to prevent air entry.
To protect your booster pump from debris that may form in the water during suction, you can purchase a Y-strainer.
To ensure your booster pump stops automatically when the water in the tank or well runs out, you need to purchase a float switch. A water level float switch is used only with tank or ball-valve models; a float switch is not needed with pressure-controller-type booster pumps.
Specifications
| Brand | Ulusu |
|---|---|
| Motor Power | 0.85 HP (0.65 kW) |
| Voltage | 220 V (Single-Phase) |
| Flow Rate Range | 0-5 m³/h |
| Head Range | 31-40 m |
| Inlet | 1" - 25 mm |
| Outlet Diameter | 1" - 25 mm |
| Suction Lift | 9 m |
Similar products
- Water Sound CPM-200 Centrifugal Water Pump, 220V, 42 m, 6 m³/h – $244.34
- jet100 – $176.95
- Water Sound CM20 Open Impeller Centrifugal Pump, 220V, 1 Hp – $147.92
- Water Sound SP1500 Centrifugal Water Pump, 220V, 32 m, 24 m³/h – $417.35
- Taifu GP750 Dirty Water Drainage Submersible Pump, 12 m³/h, 8 m – $84.53
- Winpo WNP 158 Single-Impeller Centrifugal Pump, 37 m, 220V, 6.6 m³/h – $192.83
- Varan 2HCP-160B Two-Stage Monobloc Pump, 380V, 2 Hp – $338.11
- Water Sound CM-70 Centrifugal Water Pump, 28 m, 220V, 20 m³/h – $245.66
- Water Sound SCM2-52 Two-Stage Centrifugal Pump, 45 m, 220V, 7.2 m³/h – $263.88
- Varan 2HCP-200 Two-Stage Monobloc Pump, 380V, 4 Hp – $475.59
More products in Jet Pumps (Deep Suction) · All Ulusu products