Ulusu 7" UP Series Water-Cooled Submersible Motor

Other options

• Ulusu 5" UP Series Water-Cooled Submersible Motor
• Ulusu 6" UP Series Water-Cooled Submersible Motor
• Ulusu 8" UP Series Water-Cooled Submersible Motor
• Ulusu 10" UP Series Water-Cooled Submersible Motor

Product description

Advantages

• With an outer diameter of 165 mm, it is manufactured for wells with an inner diameter of 180 mm and above.
• When used with a 7" pump, it can also be used in inclined 8" boreholes without modification.
• When used in an 8" borehole, it provides more flow volume in the pipe for high-flow pumps compared to an 8" motor.
• Hot-water-resistant special wire is included as standard equipment.
• It provides an advantage by being connectable to 6" pumps at power ratings where mechanical strength is critical.
• Rewindable winding reduces fault repair costs.

Materials and Safety Standards

• Motor power range: 30 HP – 90 HP
• 6" NEMA standard shaft end and flange
• Water-Cooled
• Can operate in vertical position
• Voltage tolerance ±10%
• Maximum water temperature: 50°C
• Suitable for hot water applications
• Motor speed 2,900 / 3,600 rpm
• Number of starts: 10 per hour
• Min. cooling water velocity 0.5 m/s
• PVC output cable
• Carbon–ceramic mechanical seal (IP68)
• Standard star-delta starting for all power ratings
• Standard winding 380 V – 400 V – 415 V "50 Hz" and
• 380 V- 460 V “60Hz”
• Filled with water and glycol mixture. (For ambient temperatures below -15 °C)
• Water-lubricated radial and Kingsbury-type axial bearings require no maintenance.
• Equalization of internal and external pressure via rubber diaphragm and pressure plug

Option

• Cable Length
• Pt 100 temperature sensor
• SiC mechanical seal (IP68)
• Special winding 220 V – 220/380 V – 500 V "50 Hz" and 220 V – 220/380 V "60 Hz"
• AISI 304–316 material options
• Starting method: direct-on-line, star-delta, or dual voltage
• Rubber output cable
• Coil wire for hot water applications

Specifications

Similar products

• Borehole Submersible Pump, 3.5″, 90 mm OD, 10 m Cable, 550W, 110 m, 2.6 m³/h – $147.92
• Submersible Pump Package for 3″ Pipe, 75 mm Diameter – $247.11
• CFA25-40-180 Electric Barrel-Type Diesel & Fuel Transfer Pump, 220V, 40 L/min – $118.87
• Sumak SDF 20/2 Sewage Submersible Pump, Single-Phase, 2.2 Hp (220V) – $940.36
• İmpo SK 403/37 Borehole Submersible Pump with Motor, 4 Hp, 257 m, 4.2 m³/h, Chrome Head – $633.95
• Nano Water Filter, 1 Inch – $171.69
• Forza 4SDM8/14 Borehole Submersible Pump, 4", 2 HP, 88 m – $270.00
• İmpo 4" ST Submersible Motor, 0.5 HP, 220V – $235.20
• İmpo SS 636/01 Stainless Steel Borehole Submersible Pump, 6", 1.5 HP, Pump Only – $442.80
• Wilo Drain Compact Slightly Dirty Water Drainage Submersible Pump, Hidden Float Switch, 5 m Cable, 8 m, 13 m³/h, 220V – $201.89