Nano Anti-Ice Corrosion and Freeze Inhibitor, Plumbing Antifreeze, 25 kg
$199.13 · In stock
SKU: Antice30kg
Other options
Product description
- Adjustable freeze point to any desired level (during standstill and shutdown)
- Provides maximum metal (Fe, Cu, Al) protection.
- Corrosion inhibitor.
- Contributes to energy (ELECTRICITY AND NATURAL GAS) savings.
- Maximum 5+5 Year Non-Degradation Property
Usage Ratios
| Desired Freeze Point | Mixing Ratio | Description |
| -20 | 3/1 | To set the freeze point to −20 °C, mix 33 liters of Nano Anti-Ice with 67 liters of water per 100 liters. |
| -30 | 2/1 | To set the freeze point to −30 °C, mix 50 liters of Nano Anti-Ice with 50 liters of water per 100 liters. |
| -40 | 1/1 | To set the freeze point to −40 °C, use Nano Anti-Ice neat throughout the system. |
NANO Anti-Ice, a protective chemical that prevents corrosion and freezing in cooling systems, is a superior chemical compound. By providing freeze protection and containing additives that prevent rust and decay, it extends system life and improves energy efficiency. As the NANO Anti-Ice and water mixture approaches its freeze point, no separation occurs in the chemical composition. The freeze resistance and concentration of the mixture remain stable for years. Thanks to this property, the metal components of composite metals in cooling systems are continuously protected against corrosion, greatly reducing maintenance and repair costs.
- This product does not damage plastic parts (such as gaskets and O-rings) used in pumps.
- Because the water mixture reduces oxygen permeability, it prevents contamination, sludge formation, and algae growth inside the plumbing system.
- It has antifreeze properties and is suitable for climate control between −1 °C and −45 °C.
- Does not cause scale or mineral deposits in plumbing systems.
- Formed by combining very special chemicals, it inhibits corrosion and scale caused by freeze protection, oxygen (O°) corrosion, and Ca, Mg, and silica deposits. It does not degrade at high temperatures, does not acidify, and does not lower the pH value over years of system operation — it prevents corrosion by forming a thin film layer on surfaces thanks to amines.
- Unlike ethylene glycol-based products used solely for freeze protection (without antifreeze properties), this is an effective fluid widely used in heating and cooling systems that also protects sensitive metals such as Fe, Cu, and Al against corrosion and metal erosion, prevents scale and mineral deposits, and provides 5 years of protection.
- No separation occurs as the mixture approaches its freeze point; therefore, no expansion occurs in the pipes and plumbing used, and no bursting or cracking takes place.
- Because it blocks oxygen permeability, it prevents the formation of mold, fungi, algae, and microorganisms in chiller groups. It is also effective against Legionella bacteria.
Similar products
- PROMAX SHAKE Bidirectional Air-Circulation Radiator Flushing Machine (Brass Valve) – $976.02
- Single Magnetic Radiator Flushing Kit – $380.98
- Radiator Flushing Machine with Magnetic Kit and 15 L Integrated Tank – $977.34
- Prof-06 Radiator Flushing Machine with Heater – $392.26
- Magnetic Filter Radiator Cleaning Kit, Transparent and White – $570.56
- TM-02 Radiator, Combi Boiler, Heat Exchanger System Cleaning Machine, Bidirectional – $286.50
- Nano Water Filter, 1 Inch – $171.69
- Kammak KPT-ECO Radiator Flushing Machine, 0.50 Hp – $236.41
- AirPro-1 Air-Pulse Compressor Radiator Flushing Machine, Unidirectional – $443.77
- Radiator Flushing Machine Pro-2 with Heating Element + 30 kg Chemical – $635.98