Supomp – Water Pumps, Submersible Pumps and Booster Pumps Türkçe

Leo APSm75AT Hot Water Booster Pump, Solar Pump, 1 HP, 4 Floors, 4 Units

$145.97 $224.57 · In stock

Brand: Leo · SKU: APSM75AT · Warranty: 24 months

Leo APSm75AT Hot Water Booster Pump, Solar Pump, 1 HP, 4 Floors, 4 UnitsLeo APSm75AT Hot Water Booster Pump, Solar Pump, 1 HP, 4 Floors, 4 UnitsLeo APSm75AT Hot Water Booster Pump, Solar Pump, 1 HP, 4 Floors, 4 Units

Other options

Product description

LEO APSm75AT Hot Water Booster Pump, Solar Pump

This is an automatic hot water booster pump typically used on the hot water line to boost hot water pressure, since solar-heated water often arrives unpressurized and cannot be mixed with cold water at the desired ratio. It operates automatically — it starts when you open the hot water tap and stops when you close it, requiring no manual intervention.

It is actively used even in the hottest regions of Türkiye and operates without any issues.

Brings your hot water to the same pressure as your cold mains water. Provides comfortable use.

You receive your hot water at a constant pressure at all times; you will not experience intermittent flow or feel the motor stopping and starting.

Simply connect it to the hot water line and plug it in — no adjustment or maintenance required.

Can be used to transfer clean water or other liquids with physical and chemical properties similar to water.

Suitable for water supply in small living spaces, automatic sprinkler systems, small air conditioning systems, or auxiliary equipment.

  • Low-noise operation and long-life bearing
  • Copper-wound motor
  • Built-in thermal overload protection for single-phase motors
  • Insulation class: F
  • Protection class: IPX4
  • Maximum ambient temperature: +50 °C

LEO APSm75AT Hot Water Booster Pump, Solar Pump Data

  • 2-second delayed start after plugging in, to prevent potential hazards caused by electrical sparks
  • Dry-run protection
  • Automatic detection of water flow at the pump inlet
  • Blockage protection
  • Operating status indicator (On / Running / No Water)
  • Cast iron pump casing with special anti-rust treatment for support
  • Anti-block impeller system
  • Brass impeller
  • AISI 304 shaft
  • Max. liquid temperature: +80 ℃
  • Max. suction lift: 6 m
  • 0.75 kW
  • 1 Hp
  • Inlet: 1" (25 mm)
  • Outlet: 1" (25 mm)
  • Weight: 13.5 kg
MODEL POWER m³/h 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 24 2.7
KW HP L/min 0 5 10 15 20 25 30 35 40 45
APSm75AT 0.75 1 H(m) 50 45 40 35 30 25 18 15 10 5

LEO APSm75AT Hot Water Booster Pump, Solar Pump Parts

NO SECTION PART
1 Pump Cover Brass
2 Impeller Brass
3 Mechanical Seal Carbon / Ceramic
4 Pump Casing HT200
5 Front Cover (Front Plate) HT200
6 Bearing -
7 Rotor -
8 Stator -
9 Pressure Sensor -
10 Cover Box ABS
11 Fan Cover PP-GF10
12 Fan PP-GF15
13 Rear cover ZL102
14 Terminal Cover ABS
15 Capacitor -
16 Pressure Tank Iron Core
17 Pump Head PA66
18 Check Valve Spring AISI 304
19 Check Valve PPO
20 Sealing Gasket Rubber
21 Inlet Connection HT200

Specifications

BrandLeo

Similar products

More products in Hot Water Booster Pump · All Leo products