BP260H-GN Solar Pressure Booster Pump, Hot Water Booster Set, Pump Controller

Cacheng BP260H-GN Hot Water Booster Set

This is an automatic hot water booster set installed on the hot water line to pressurize hot water — commonly needed because solar energy systems often deliver hot water without adequate pressure, which prevents hot and cold water from being mixed in the desired ratio.

It operates reliably even in the hottest regions of Türkiye.

Brings your hot water to the same pressure as your cold mains water. Provides comfortable use.

You always receive hot water at a consistent pressure; you will not experience intermittent flow or notice the pump stopping and starting.

Simply connect it to the hot water line and plug it in — no adjustment or maintenance required.

What Is the Cacheng BP260H-GN Solar Pressure Booster Pump, Hot Water Booster Set, and Pump Controller?

This booster set has two operating modes — manual and automatic. In manual mode it runs as long as the power plug is connected; in automatic mode it starts when you open a tap and stops when you close it. It is ideal for single apartments and detached houses; in homes where it is installed, you will have no pressure problems with hot water or difficulty mixing and tempering water. These products are resistant to hot water and operate without issues in all solar energy systems.

When operating in automatic mode, if water stops flowing or is cut off, the pump will protect itself, so there are no fault issues — it is protected against dry running.

Pump controllers are used not only for hot water but also in locations where water arrives without sufficient pressure, to pressurize the supply.

The pump and motor are sealless; two gaskets form a single integrated unit to ensure leak-tightness. The bearings are lubricated by the pumped liquid.

What Are the Applications of the Cacheng BP260H-GN Solar Pressure Booster Pump, Hot Water Booster Set, and Pump Controller?

Used in heating systems, hot water systems, commercial building hot water systems, and cooling and air-conditioning systems.

Pressure controllers are used not only for hot water but also for pressurizing water supply where the flow arrives without pressure.

BP260H-GN
Power	260 Watt
Voltage	220 Volt
Amperage	0.58 Ampere
Head	15 meters
Flow Rate	25 L/min — 1.5 m³/h
Inlet/Outlet Size	1/2"
Insulation Class	F
Motor Casing Material	Aluminum
Motor Material	100% Copper
Box Dimensions	21.8x16x12 cm
Box Weight	3.8 KG