Aircol MOP 45/120 Decorative Exhaust Fan with Automatic Grille

Request a quote: 0531 565 11 25. · Out of stock

Brand: Aircol · SKU: AIRCOLMOP45-120 · Warranty: 24 months

Other options

Thanks to its electronic board, the automatic grille provides two different airflow rates in active mode and sleep mode (45/120 m³/h and 30/60 m³/h).
When the automatic grille is triggered via a switch, it provides ventilation in active mode, then switches to sleep mode ventilation 30 minutes after being triggered.
With its very slim and elegant front appearance, it is an indispensable element of decorative spaces.
Thanks to the patented, specially designed adjustable mounting mechanism, it can be easily installed on ceilings of varying thicknesses from 0.5 mm to 20 mm without drilling screw holes.
Manufactured from high-quality ABS plastic, our product provides the best protection against bad odors, moisture, and similar external factors while never losing its original appearance.
The gasket at the air outlet minimizes potential air leaks during pipe connection.
Can be connected vertically or horizontally to walls, ceilings, and similar surfaces with ease.
The front grille, which is exposed to dust, can be removed very easily and cleaned by wiping or washing.
Thanks to the optimally designed body and air exhaust path, both the noise level has been reduced to a minimum and high-static-pressure (40 Pa – 160 Pa) air extraction has been achieved.
Our product has IPX1 protection and Class II insulation, which does not require an earth connection.

Can be used directly with an on/off switch or wired in parallel with a light fixture.

With the timer electronic board, the automatic grille can be set to switch to sleep mode 30 minutes after being triggered.

1 – Cut an opening of 180 mm × 180 mm in the mounting surface.
2 – Make sure the tabs of the adjustable mounting bracket are fully pushed inward into the grille.
3 – Then seat the grille into the opening as shown in the diagram.
4 – Push the tabs of the adjustable mounting bracket outward to secure the grille to the ceiling.
5 – Then tighten the screws of the adjustable mounting mechanism to fix the grille to the ceiling.
6 – Finally, seat the front cover of the grille onto the body to complete the installation.