Supomp – Water Pumps, Submersible Pumps and Booster Pumps Türkçe

2" (50 mm OD) Slimmest Submersible Pump, 10 m Cable, 180 W, 55 m, 1 m³/h

$203.86 · In stock

Brand: Cacheng · SKU: 50QGD0-3-30-0-18 · Warranty: 24 months

2" (50 mm OD) Slimmest Submersible Pump, 10 m Cable, 180 W, 55 m, 1 m³/h2" (50 mm OD) Slimmest Submersible Pump, 10 m Cable, 180 W, 55 m, 1 m³/h2" (50 mm OD) Slimmest Submersible Pump, 10 m Cable, 180 W, 55 m, 1 m³/h

Other options

Product description

2" (50 mm OD) Slimmest Submersible Pump Specifications

This 2" submersible pump with a 50 mm outer diameter is a special submersible pump. It fits inside 60 mm borehole casings and is designed for use in narrow boreholes where standard submersible pumps cannot fit, as well as in areas where the water level is too low for a centrifugal pump to be used.


According to the Chart Above

At 50 m
120 L/h
At 45 m
200 L/h
At 37 m
340 L/h
At 33 m
390 L/h
At 27 m
500 Liters per Hour
At 19 m
620 L/h
At 9 m
790 L/h
At 4 m
900 L/h

Powered by a 220 V, 180 W motor. It can deliver water to a head of up to 55 m and transfer up to 1 ton per hour. It has a ½" outlet and comes with a 10 m cable.

Stainless steel casing.

Features a built-in internal check valve.
THIS SUBMERSIBLE PUMP MUST NOT BE USED IN SANDY WATER.


Voltage : 220 Volt
Watt : 180 W
Head : 55 m
Flow Rate : 1 m³/h

Outlet

: 1/2"
Cable Length : 10 Meters

Stainless Steel Casing

The submersible pump features a full AISI 304 stainless steel casing and has a built-in foot valve. Both the motor and pump casing are manufactured from stainless steel. You can count on the pump's high resistance to corrosion.

High Flow Rate and Deep Immersion Depth

It can deliver 1 ton of water per hour and pump water to a head of up to 55 m. Low power consumption and high efficiency for water supply. The patented impeller design achieves high head and flow rate at low power levels while also providing a long service life.

Filter System

The stainless steel wire mesh system is designed to prevent sediment and debris from entering the pump from outside. If your well has just been drilled or sand is present, we recommend wrapping a fine cloth or tulle around the suction section when lowering the pump into the well.

Motor Quality

This 2-inch submersible pump has thermal overload protection that automatically shuts the pump down in abnormal conditions such as motor seizure or voltage surges. The rotor and stator are manufactured to high quality standards; the rotor is precision-balanced and fitted with silicon steel strips.

Specifications

BrandCacheng

Similar products

More products in Borehole Submersible Pump Prices · All Cacheng products