Beet Engine Pump
Beet engine pumps for agricultural irrigation: tractor or engine-driven, high-flow single-stage and multistage models.
Products (4)
- Akın Pompa KMP330-40HP PTO-Driven Irrigation Pump, Drip and Sprinkler, 55 m, 58 m³/h – Request a quote (out of stock)
- Akın Pompa KMP-KD Tractor Beet Engine Multistage Pump – Request a quote (out of stock)
- Akın Pompa PCR 325 Beet Engine Pump, 3" Inlet, 2.5" Outlet – $423.87
- Ekler PSP 90-65 Beet Pump, 40 m, 50 m³/h, 10 HP – Request a quote (out of stock)
Brands: Akın Pompa · Ekler
What is a beet engine pump?
A beet engine pump is the common name used among farmers for high-flow irrigation pumps driven by a tractor PTO or a separate engine. The name comes from their long history of use in irrigating sugar beet and similar field crops. They are used to draw large volumes of water from canals, ponds, reservoir lakes, or wells and to irrigate fields by flood or sprinkler methods.
Model types
- Single-stage models: High flow rate and medium pressure; for flood irrigation and canal water transfer.
- Multistage models: Higher pressure; for sprinkler systems and distant fields.
- Rear PTO shaft models: Directly driven by the tractor's PTO.
- Engine-coupled models: Can be used together with a diesel or petrol engine.
The inlet and outlet dimensions stated in product names (for example 3-inch inlet, 2.5-inch outlet) determine the hose and pipe diameters to be used.
Selection recommendations
First decide on your irrigation method: flow rate is the priority for flood irrigation, while pressure is the priority for sprinkler irrigation. The power and speed required by the pump must be compatible with your tractor's PTO ratings. The height difference between the water source and the pump should be small; the suction line should be kept short and leak-free. Using larger-diameter pipe on long pipe runs reduces friction losses and lessens the load on the tractor.
Maintenance
At the start of the season, lubricate the bearings and inspect the gaskets; at the end of the season, drain the water from the pump and store it in a protected location. Using a strainer on the suction side prevents weeds and stones in canal water from damaging the impeller.
Frequently asked questions
Is a beet engine pump the same as a tractor pump?
They are pumps that do largely the same job; the term beet engine is used more specifically for high-flow irrigation pumps.
When is a multistage model needed?
Multistage models are preferred when sprinkler heads or distant fields require higher pressure.
Is a foot valve needed on the suction side?
For models that are not self-priming, a foot valve and strainer should be fitted at the end of the suction pipe.
How many acres can be irrigated?
The area that can be irrigated depends on the flow rate, the irrigation method, and the water requirements of the crop.
What are the other options?
For other PTO-driven models, see the tractor pumps category.
How far from the tractor can the pump be placed?
The length and permitted angle of the PTO shaft determine this distance; excessively extending the shaft causes vibration.