Cranes
Wireless remote controls for cranes and hoists (6-button, single- and double-speed) and audible and visual crane warning sirens.
Products (3)
- Crane Warning Siren, Audio and Visual, 220V, Warning Light – $19.20
- REMOBAT Wireless Crane Remote Control Set, 6-Button, Single-Speed, Hand-Held Pendant – $90.00
- Wieltra Wireless Crane Remote Control Set, 6-Button, Dual-Speed – $276.00
What does a wireless crane remote control do?
Wireless crane remote controls are remote control systems that can be used in place of the wired push-button panels (pendants) on overhead cranes, monorails, and electric hoists. They allow the operator to control the crane from a safe distance from the load and reduce cable-related faults. The system consists of a transmitter (handheld remote) and a receiver unit connected to the crane's control panel.
Category contents
- 6-button single-speed controls: Control up/down, forward/backward, and left/right movements at a single speed.
- 6-button double-speed controls: Allow movements to be performed at two speeds — slow and fast — which is advantageous for precise load positioning.
- Crane warning sirens: Provide audible and visual warnings to alert nearby workers while the crane is in motion.
Selection criteria
The number of buttons and speed steps on the remote must be compatible with the crane's movement functions. The supply voltage of the receiver unit must be selected to match the control voltage of the crane panel. An emergency stop button must be present on the remote and must be in working order. If more than one crane is used in the same area, the remotes must be set to different codes to prevent them from interfering with each other.
Installation and safety
Connection of the receiver unit to the crane panel must be carried out by personnel competent in electrical and crane systems. After installation, all functions and the emergency stop should be tested without a load. Periodic inspections of lifting equipment must be carried out in accordance with applicable regulations. When not in use, the remote should be stored where unauthorized persons cannot access it, and the batteries should be checked regularly.
Frequently asked questions
Does a wireless remote work with every crane?
It can be adapted to most cranes as long as the number of functions and control voltage are compatible.
Single-speed or double-speed?
Double-speed controls have the advantage in tasks requiring precise positioning.
Why is the emergency stop important?
It immediately stops all crane movements in the event of danger.
What is the range of the remote?
The range is stated in the product information; obstacles in the environment may affect the range.
Is a warning siren mandatory?
Audible and visual warnings are recommended for workplace safety.
Who should carry out the installation?
It should be carried out by a technician competent in crane and electrical systems.
How often should the remote battery be replaced?
It depends on usage intensity; since a weak battery can cause signal interruptions, it should be checked regularly and a spare battery kept on hand.
Can the wired push-button panel be removed entirely?
In some applications it is recommended to keep it as a backup; it allows the crane to be operated safely if the wireless system fails.