Booster Pump Sets
Single-, twin-, and triple-pump booster sets for apartment buildings, residential complexes, hotels, and industry: vertical multistage, variable-speed, and tank-equipped systems.
Products (52)
- Kentaş 1MH120-5M Horizontal Shaft Single-Pump Booster Set, 1.5 HP, 220V – Request a quote
- Kentaş 1MV120-5M Single-Pump Vertical Booster Pump, 1.5 HP, 220V – Request a quote
- Kentaş 1MV150-8MT Single Vertical Unit Booster Set, 3 HP, 380 V – Request a quote
- Kentaş 1MV230-8MT Single Vertical Multistage Booster Set, 4 HP, 380 V – Request a quote
- Kentaş 1MV365-7MT Single-Pump Vertical Booster Set, 5.5 HP, 380 V – Request a quote
- Kentaş 2MV120-5M Twin Vertical Booster Set, 1.5 HP, 220 V – Request a quote
- Kentaş 2MV150-8MT Twin Vertical Booster Set, 3 HP, 380 V – Request a quote
- Kentaş 2MV230-8MT Twin Vertical Pump Booster Set, 4 HP, 380 V – Request a quote
- Kentaş 2MV365-7MT Twin Vertical Inline Booster Set, 5.5 HP, 380V – Request a quote
- Master 2 MV 9/4 M Vertical-Pump Booster Pump – Request a quote (out of stock)
- Master Single-Pump Booster Set, 6 Floors, 15 Apartments, 380 V, 5 m³/h, 45 m – Request a quote (out of stock)
- Nortek 1 DMK 1207 Vertical Multistage Booster Set, 4 HP, 380V, 300-Liter Tank – $1,560.00
- Nortek 1 DMK 1505 Vertical Multistage Twin-Pump Booster Set, 5.5 HP, 380 V, 300 L Tank – $2,280.00
- Nortek 2 DMK 1207 Twin-Pump Booster Set, 2 × 4 HP, 300 L Tank – $2,880.00
- Nortek 2 DMK 1505 Twin-Pump Booster Set, 2 × 5.5 HP, 300 L Tank – $4,320.00
- Nortek 2 DMK 705 Twin-Pump Booster Set, 2 × 1.5 HP, 300 L Tank – $2,112.00
- Nortek 2 DMK 908 Twin-Pump Booster Set, 2×3 HP, 300 L Tank – $2,520.00
- Nortek 2 DMK SS 605 Twin-Pump Booster Set, Steel Fan, 2 × 1.6 HP, 300 L Tank – $2,124.00
- Nortek DMK 705 M Vertical Multistage Twin-Pump Booster Set, 1.5 HP, 220V, 100 L Tank – $732.00
- Nortek DMK 908 M Vertical Shaft Multistage Twin-Pump Booster Set, 3 HP, 220 V, 100 L Tank – $948.00
- Nortek DMK SS 605 M Vertical Multistage Booster Pump (Steel Fan), 1.6 HP, 220 V, 100 L Tank – $726.00
- Nortek YMK 705 M Horizontal Multistage Twin-Pump Booster Set, 1.5 HP, 220 V, 50 L Tank – $588.00
- Nortek YMK SS 604 Horizontal Multistage Twin-Pump Booster Set (Steel Fan), 1.3 HP, 220V, 50 L Tank – $504.00
- Pedrollo CB2-2CP 25/16A Hydrofresh Booster Pump, 8-10 Floors, 25-30 Apartments – $3,200.43
Brands: Kentaş · Master · Nortek · Pedrollo
What is a booster pump set?
A booster pump set is a system in which one or more pumps are assembled on a single frame together with common manifolds, a control panel, and a pressure tank, used in locations requiring high flow rate and pressure such as multi-story buildings, residential complexes, hotels, hospitals, and industrial facilities. It is typically built with vertical or horizontal multistage pumps and delivered ready to use.
Single-pump or multi-pump?
- Single-pump sets: An economical solution for medium-sized buildings.
- Twin-pump sets: The pumps alternate to wear evenly; if one fails, the other continues without interrupting the water supply.
- Three-pump and larger sets: Additional pumps stage in as demand increases; preferred in large residential complexes and facilities.
- Variable-speed sets: Each pump or the lead pump operates with a variable frequency drive (VFD), maintaining constant pressure and reducing energy consumption.
- Self-priming sets: Equipped with self-priming pumps for installations where the pump cannot be placed below the water tank.
How is capacity determined?
The floor and apartment counts in product names are a good starting point for initial selection. For larger projects, however, flow rate and pressure should be calculated by a plumbing engineer based on the number of users, simultaneous usage rate, building height, and pipe losses. Tank volume is also selected according to this calculation to ensure the pumps run only when needed. Three-phase (380 V) supply is required for most large sets.
Installation and maintenance
The set should be installed in a dry, ventilated plant room at the same level as or below the storage tank. Check valves on pump outlets, valves on the suction and discharge manifolds, and vibration-damping connections are important for maintenance and quiet operation. Tank pre-charge pressure, pressure sensor accuracy, and pump mechanical seals should be checked periodically. Balanced operating hours across pumps indicate that the panel's rotation setting is correctly configured.
Frequently asked questions
What is the difference between a booster pump set and a twin-pump booster set?
Twin-pump booster sets are single-pump units with small capacity. Booster pump sets, on the other hand, are designed for high capacity, redundant operation, and advanced control.
Will the water be cut off if one of the pumps fails?
In multi-pump sets, the faulty pump is taken out of service while the others continue running. For this reason, a system with at least two pumps is recommended for critical buildings.
How much energy does variable-speed control save?
The amount of savings depends on the usage profile. In buildings where demand varies greatly throughout the day, variable-speed systems consume noticeably less energy than fixed-speed systems.
What information should I provide for set selection?
You can request a quote by providing the number of floors and apartments, tank location, existing pipe diameters, and electrical infrastructure details.